제조에서 시공까지- BBEPOXY

    

             MATERIAL SAFETY DATA SHEET

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

MANUFACTURER:                              Trade Name : WET LOW VISCOSITY GRAUT
  BIBONG IND Co., Ltd.                          ID Code No        : BE-800
  #190-41, Kung-dong, Kuro-ku,                   Formular : COMPLEX
  Seoul, Korea                                                                
  Tel        : (02) 2625-5231                                           
  Fax : (02) 2683-5230                                      

 2. COMPOSITION/INFORMATION ON INGREDIENT

NO      INGREDIENTS             CAS NO                  WT%             ACUTE ORAL
                                                                               TOXICITY
                                                                               DATA LD50
󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚
1.        DGEBA RESIN            25068-38-6                54 <             No data
2.             B.G.E                2426-08-6                 12 <             No data
3.        ALKYL ETHER AMINE                                5 <              No data
4.        NONYL PHENOL          25154-52-3                 7 <              No data
5.        POLY AMIDE RESIN      98910-91-8                  8 <              No data
6.    MODIFIED ALIPHATIC AMINE                             14 <              No data

󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚󰠚
3.  HEALTH INFORMATION

POTENTIAL HEALTH EFFECTS :

EYE CONTACT
Direct contact may cause mild irritation.

SKIN CONTACT
Direct contact may cause mild irritation.

INHALATION
Vapor, especially upon heating may cause irritation of the respiratory tract.

INGESTION
Not a probable route of entry into the body

SIGNS AND SYMPTOMS
Repeated and/or prolonged contact with the skin may cause allergic reaction/sensitization.

AGGRAVATED MEDICAL CONDITIONS
Preexisting eye, skin and respiratory disorders may be aggravated by exposure to this product. Preexisting
skin or respiratory tract allergy may increase the chance of developing increased allergy  symptoms  from
exposure to this product.

OTHER HEALTH EFFECTS 
Not available

4.  OCCUPATIONAL EXPOSURE LIMITS

NO 1    Not applicable
NO 2    Not alpplicable

5. EMERGENCY AND FIRST AID

EYE CONTACT
Flush eyes with plenty of water for at least 15 minutes while holding eyelids open. Call a physician if signs of irrigation appear.

SKIN CONTACT
Immediately remove contaminated clothing or shoes, wipe excess from skin and flush with plenty of water for at least 15 minutes. Use soap if readily available, or follow by thoroughly washing with soap and water. Do not reuse clothing until thoroughly decontaminated.

INHALATION
Remove victim to fresh air and provide oxygen if breathing is difficult. Get medical attention.

INGESTION
Do not induce vomiting. give one glass of water unless victim is drowsy, convulsing, or unconscious. Seek medical attention immediately.

6. SUPPLEMENTAL HEALTH INFORMATION
                                                                          
Animal experiments have shown distributed blood formation.  The degree of toxicity of uncured epoxy resins
varies and is partly dependent on the extent of unreacted curing agent.
When heated to decomposition it emits acrid smoke and fumes.
                                 

7. PHYSICAL DATA

 
Boiling
Point  NDVapor
 Pressure   NDMelting
 Point  NDVapor
 Density   1 〈Specific
 Gravity  0.96 (H2O=1)  Solublity  Slightly (In water)
 

APPEARANCE AND ODOR : Dark brownish liquid and slight sweet odor
Molecular Weight : ND
 
8. FIRE AND EXPLOSION DATA

FLASH POINT AND METHOD :  >110°C(230F) (Setaflash Closed Cup)
                                

EXTINGUISHING MEDIA
Use water fog, foam, carbon dioxide or dry chemical.

SPECIAL PRECAUTIONS
Toxic gases may be released during fire. Use positive-pressure, self-contained breathing apparatus and full protective clothing.

UNUSUAL FIRE AND EXPLOSION

Isolate from heat, electrical equipment, sparks and opened flame. Wear self-contained breathing apparatus.

9. STABILITY AND REACTIVITY

CHEMICAL STABILITY : Stable
CONDITIONS AND MATERIALS TO AVOID
This product is normally stable and is not reactive with water.

HAZARDOUS POLYMERIZATION
Will not occur

HAZARDOUS DECOMPOSITION PRODUCTS
Not available

10. EXPOSURE CONTROLS/PERSONAL PROTECTION

RESPIRATORY PROTECTION
Do not breathe vapors/mists. If exposure may or does exceed occupational exposure(SEC. Ⅱ) use a NIOSH-
approved respirator to prevent overexposure. In accord with 29 CFR 1910. 124 use either a full-face,  atmos-
phere-supplying respirator or air-purifying respirator for organic vapors.

PROTECTIVE CLOTHING
Do not get in eyes. Wear chemical goggles if there is potential content with eyes.  Do not get  on  clothing.  Wear chemical-resistant protective clothing such as gloves, outer clothing or apron, overshoes and  a  face-  shield suitable to potential exposure.

ENGINEERING CONTROLS
For the product at ambient temperatures use adequate ventilation. For the heated product, use exhaust ventilation to remove vapor.

ADDITIONAL PROTECTIVE MEASURES
Eye wash fountains and safety showers should be available for emergency use. 
11. ENVIRONMENTAL PROTECTION

SPILL OR LEAK PROCEDURES
Ventilate area.  Avoid breathing vapor.  Wear appropriate personal protective equipment,  including appropriate
respiratory protection. Contain spill if possible. Wipe up or absorb on suitable material and shovel up. Prevent
entry into sewers and waterways. Avoid contact with skin, eyes or clothing.

12. HANDLING AND STORAGE
Store in a cool, dry place with adequate ventilation. Keep away from open flames and high temperatures. Do not pressurize containers to empty them.

 

13. TRANSPORTATION REQUIREMENTS

DOT HAZARD CLASSIFICATION

DOT PROPER SHIPPING NAME

OTHER REQUIREMENTS

* DOT - DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS

14.  ECOLOGICAL INFORMATION
There is no data available for this product. Polyamide in general, are considered toxic to fish and other
aquatic organism

15. DISPOSAL CONSIDERATIONS

Incineration is the recommended disposal method for all chemical wastes. Material collected on absorbent material may be disposited in a land fill in accordance with all applicable local, state and federal regulations.